How to Install Cooler Master Hyper 212 LED on LGA 1151

Install Cooler Master Hyper 212 LED

Hi friends , lets see how to install cooler master hyper 212 LED on Intel LGA 1151 socket motherboard. Today i am installing CM Hyper 212 LED CPU Cooler for my Intel core i7-7700K Processor on Asus Maximus Hero IX Motherboard. If you are building a 6th or 7th Generation gaming PC and getting confused how to install CPU and Cooler fan then follow my guide i am here to help you out. Below are the step by step instructions you have to follow it or you can also watch a video tutorial for it from here How to Install CM Hyper 212 CPU Cooler.

How to Install Cooler Master Hyper 212 LED (CPU Cooler)

Install Cooler Master Hyper 212 LED - 1

Step 1: You have already installed you CPU on your motherboard , then unbox your CPU cooler.

Install Cooler Master Hyper 212 LED - 2

Step 2: First you have to unplug you fan from the heat sink Carefully. (just push the 4 clips)

Install Cooler Master Hyper 212 LED - 3

Step 3: Now you have these Mounting tools (Nuts, Screws, Gear, and cooling paste). Confused which are the right one !! Just Follow next step.

Install Cooler Master Hyper 212 LED - 4

Step 4: We have Intel Socket just use this mounting too and put it as shown in above image.

Install Cooler Master Hyper 212 LED - 5

Step 5: Using a screw tight it from the back with the help of 4 head screw driver. (Screw given with Cooler)

Install Cooler Master Hyper 212 LED - 6

Step 6: Tight the mounting tool on the other side also , your CPU cooler will look like this.

Install Cooler Master Hyper 212 LED - 7

Step 7: Now take out the spider given with cooler and plug it in the back of the mother board align to 4 holes.

Install Cooler Master Hyper 212 LED - 8

Step 8: It will pop up from the motherboard holes,ย  like the image above.

Install Cooler Master Hyper 212 LED - 9

Step 9: Now this is important , do not forget to remove the plastic cover from the CPU cooler Before installing.

Install Cooler Master Hyper 212 LED - 10

Step 10: Apply a little bit of cooling paste on your CPU , don’t use too much and don’t use less then above image.

Install Cooler Master Hyper 212 LED - 11

Step 11: Now take out the dual bolts and tight it on every point of the spider like above image.

Install Cooler Master Hyper 212 LED - 12

Step 12: Double tight those dual bolts by this tool using the screwdriver as shown in above image.

Install Cooler Master Hyper 212 LED - 13

Step 13: Put the cooler align to those dual bolts and tight all screw equally with screwdriver.

Install Cooler Master Hyper 212 LED - 14

Step 14: Now fit the fan to the heat sink as before , just push to fit.

Install Cooler Master Hyper 212 LED - 15

Step 15: Connect the cooler plug to your motherboard’s CPU_FAN Socket. (May be you need to read motherboard manual to find the right socket)

Install Cooler Master Hyper 212 LED - 16

Congratulations !! You have successfully installed your Cooler Master Hyper 212 CPU Cooler on Intel LGA 1151 motherboard. (Tip: check your setup before assemble it in to case, Insert RAM and Plug a SMPS to check.) If you have any questions please comment below and you can also watch a video tutorial to perform these steps , find the video below. Hop you learned how toย Install Cooler Master Hyper 212 LED. Thank you for reading , Have a Nice Day ๐Ÿ™‚

How to Install i7-7700K & CM Hyper 212 LED CPU Cooler

5Shares

9 Comments

  1. Avatar for Smc Smc 2 September, 2017 Reply
    • Avatar for TrickIKnow TrickIKnow 7 September, 2017 Reply
    • Avatar for TrickIKnow TrickIKnow 11 April, 2018 Reply
  2. Avatar for AALBERT SEPERS AALBERT SEPERS 17 November, 2017 Reply
  3. Avatar for edgar edgar 12 April, 2018 Reply
  4. Avatar for Joshua Pompey Magssino Joshua Pompey Magssino 16 November, 2018 Reply
    • Avatar for TrickIKnow TrickIKnow 20 November, 2018 Reply
  5. Avatar for Ernest Johnston Ernest Johnston 14 November, 2019 Reply

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.